Instructions - Sound System & Mixer

 

If the mixer is not running, you can turn it on by pressing the on/off switch on the right side of the rear edge of the mixer. You may need to pull the mixer out for better access.

 

DJ & Band: can plug into the empty channels with XLR cable. It is strictly forbidden to change any existing connections on the mixing console or in the rest of the sound system. Restoring changes will be charged to the bride and groom.

 

Audio playback via mobile or computer: Connect the black aux cable with the headphone jack (3.5mm) or suitable adapter to your device. If the device asks, do not confirm that it is headphones because then the sound level out of your device will be limited. Turn on the sound, then increase the volume of the channel marked “aux” on the mixer and then increase the main.

​

​

Instructions - Soundsystem & Mixertable

 

If the mixing table is not turned on then switch on the on/off switch on the right side of the backside of the table. You might need to pull out the mixer table a little to reach.

 

DJs & Bands: connect your mixer table to our one of the empty channels on our mixer table by an XLR cable. Changing any existential connection on the mixer table is strictly prohibited and will be associated with a cost for the wedding couple.

 

Playback through phone or computer: connect the AUX cable to the device using the appropriate adapter if needed. When you connect, IF the device asks you if the new connection is headphones, you must say no or choose the other option. Otherwise the sound will not reach proper volume. Now turn on the sound in the device, raise the volume on the “aux” channel on the mixer table and finally the “main” channel.

​